Collapse bottom bar
Subscribe

Big Bucks: 10 Secrets for Trailcam Success

by North American Whitetail Online Staff   |  November 1st, 2017 0

Two pros share their best secrets to patterning trophy whitetails with trail cameras

It’s no secret that trail cameras can offer a wide variety of information throughout the year on deer inhabiting the land that you hunt. And when Mr. Big shows up, a trail cam array can help your set up a strategy to puts you in a better positon to harvest that buck. The question every whitetail hunter asks at some point is: What’s the best way to use trail cameras in trying to pattern trophy whitetails?

Here’s how some of our deer hunting experts answered that question.

Chris Parrish  |  Knight & Hale

chris_parrish_1
“On one hand, trail cameras are among the best tools for locating and tracking mature bucks. But if improperly used, they actually can help keep a buck alive to reach the next age class.

Be Patient

“While I do use cameras, I use them sparingly and with tons of patience. I hunt mostly public land, which presents two challenges. First, you run a risk of having cameras stolen. Secondly, on many public lands it isn’t legal to use an attractant to get deer in front of a camera.

“If I’m not able to use any mineral or food for bait, in the summer I’ll often hang cameras around water holes or river crossings, as well as in heavily used areas going into or out of food sources.

I tend to mount my cameras 7-8 feet off the ground, tilting them downward. This usually will keep those with sticky hands from walking off with your goods.

Use An Attractant Where Legal

“I like to find places that lead from known buck bedding areas, as this increases the chances of getting images of what I’m looking for. While hunting private land on which attractants can be used, I just add corn or mineral to help ensure a stopover in front of the camera.

“I force myself to give the cameras at least three weeks before checking in the early season. This is generally an inventory check, as we all know many things change even in early September. However, this should give you a pretty good indication of where your efforts should start in early season.

related

Dr. Deer: Getting the Most of Your Trail Camera

Dr. James Kroll offers advice for using your trail cam effectively....

Setups For Scrapes

“Once we get through the first week or so of bow season, I back off and wait until the first good scrapes start to show. I will then lock onto good scrapes closer to cover. These places are where I tend to get more daytime photos of mature bucks.

“I give the cameras several days before I check them. And when I do, it’s during non-peak movement times. This depends a lot on the moon. If we have a full moon and appropriate temps, midday might not be the best time to check.

“I fully believe deer change areas during different times of the year/rut cycle. For example, on Oct. 30 I shot a big 4 1/2-year-old 10-pointer a half-mile from where I’d been photographing him in late September and early October. Without finding good scrapes to place the cameras on, I wouldn’t have known where he’d moved.

Place Cameras on Funnels

“I also like to place cameras in funnel areas between bedding cover and food sources; this tells me if bucks are traveling, searching for receptive does. Again, in these places I get more daytime photos and am able to set up a game plan to hunt.

Guide to Off-Season Trail Cameras
related

Your Guide To Using Trail Cameras in the Offseason

I couldn't believe my eyes. There were two bucks in the photo and they were both giants. Long, stout beams. Curved and tow...

Don’t Overpressure Your Area

“Late season can be a tough time, due to weather conditions. If it’s bitterly cold and the deer are locked in on food, they tend to bed very close. Often the slightest pressure can set a bad tone. Putting cameras on posts in the food source seems to be a good way to alleviate some pressure and makes them much easier to check. This time of year has some of the best hunting, but it’s also one of the toughest times to get good photos without messing things up.

Watch Your Scent

“I tend to go overboard on keeping scent to a minimum while setting and checking. I don’t allow anyone to go with me other than my son, as he does what Dad does. Keep clean and keep pressure low: These are, in my opinion, two of the most important things with using trail cameras.

Place Cameras In Easy Access Areas

“I also like setting cameras in an area I can check going into a stand or coming out of it. This doesn’t always work out, but it’s handy when you can find this setup.”

Mike Clerkin  |  NAW Television

clerkin_1
Mike Clerkin  |  NAW Television
“As the calendar approaches mid-summer, a great fever starts building in any serious whitetail hunter. We’ve missed chasing them for months now, and the embers are starting to glow. For many hunters, all interest now is focused on getting trail cameras out there to capture those first up-close-and-personal views of target bucks.

“The technology we now have in motion- and infrared-activated cameras, as well as time-lapse units, is outstanding. Thanks to these tools, some hunters have become almost as interested in getting photos of that ‘ghost’ buck they’ve been after for several seasons as they are in actually shooting him. But I’ve learned to be careful not to mess up my hunting in an effort to get photos.

“As opening day approaches, often we find our fever has progressed into a serious sickness. We can’t stay away from our cameras. But then we find the buck photos have stopped coming. When this occurs, our fear turns into outright panic. Why have these deer chosen to abandon my property? I have all their needs covered here! Yet, after weeks of getting incredible daytime photos, it seems “my” bucks have left. And when that happens, I start to question myself. What happened? Do I need to move my cameras?

Mike Clerkin often uses time-lapse cameras to inventory summer bucks. These frames show the same Indiana buck “blowing up” in just one month. Where legal, an attractant can sometimes hold a deer longer for better photos. Photo courtesy of Mike Clerkin

Mike Clerkin often uses time-lapse cameras to inventory summer bucks. These frames show the same Indiana buck “blowing up” in just one month. Where legal, an attractant can sometimes hold a deer longer for better photos. Photo courtesy of Mike Clerkin

Manage for Scent Control

“The explanation for this shift took me a few seasons to understand. I truly enjoyed seeing shooter bucks on my trail cameras and didn’t realize I was pressuring them off the property with my frequent card checking. I also wasn’t taking my scent control that seriously when I went to the camera locations. Since then, I’ve learned it’s critical to have scent-free boots and clothing when mounting or checking cameras. Failing to adhere to this strategy was a serious mistake on my part in the early days of using cameras. Where legal, using an attractant to hold deer in front of your cameras longer can also help.

Keep Cameras On Food Sources

“Remember: Trail cameras really are just tools to help you achieve a goal. Use them to survey the property at limited times, and don’t get carried away with putting them in areas where deer feel safe. I mount cameras only in food sources or in staging areas where trails lead to/from daytime movement areas. Even if I only get nighttime photos as a result, I gain knowledge about the herd and don’t create problems in core areas.

Scout Smart

“Although many properties don’t provide an elevated spot from which to survey deer at long distance, I’m always looking for one. Examples might be barns or grain storage bins, or simply the highest hill on the property. Scouting is about more than just getting cool photos of deer. Use your own eyes, too.”

Load Comments ( )

Related posts:

  1. Introducing the Primos Proof Trail Cameras
  2. NAW’s Best New Trail Cameras for 2014
  3. 12 New Trail Cameras for 2012
  4. Tips for Getting the Most Out Of Your Trail Cameras
  5. Scout Like A Pro With These Trail Cameras!
back to top